3 system information and, Channel selection, 1 system information – Approach Tech DVR-3024 User Manual

Page 14: 2 channel selection, 3 system information and channel selection

Advertising
background image

12

CH1

CH2

CH3

CH4

01/01/2005 12:00:00

2.3 System Information and

Channel Selection

2.3.1 System information

You can display system settings information as

shown in FIGURE 3.3 A below at any time by

pressing the Display button

8

. In the

playback mode, the recorded video information

is displayed. In the live or recording mode, the

Manual Recording information is displayed.

Each sequential press of the Display button

displays a different message detailed in the

following example. By default, the unit displays

time, date, and an indicating bar of capacity

status on a monitor as shown.

Default Display

CH1, CH2, CH3, CH4 are titles for the

corresponding channels, changeable in the

setup menu.

Capacity Status:

(Capacity Used) (Capacity Remaining)

01- 01-2005 12:00:00

(Date)

(Time)

Press the Display button

8

once; the DVR

will display the following sample message plus

the default display. Press the Display button

8

again; the unit will not display any OSD

message. Press the button one more time to

go back to the default display

.

FIGURE 3.3 A

(1+2: 59G): Total capacity of installed hard disk, 59

GB

.

(12.4 HR): Total 12.4 hour recording time available

.

(

): Timer record activated

.

(

): Alarm record activated

.

(QUALITY: BEST): Record quality setting, BEST

.

(NTSC ): NTSC system

.

(RATE: 6 HR): Setting of Record time mode, 6 hours

.

(20 F/S): Record speed setting, 20 fields/sec

.

(

): Audio function activated

.

(

): Indicates which HDD is activated

.

( 9K ): The image file size

.

( HD ): Hard disk compartment

.

( SIZE 20G): The capacity of the installed hard disk

.

( REC ): Percentage of system recording

.

( PLAY ): Percentage of system playback

.

( IP : 192 . 168 . 1 . 90 ): Network IP Address

192.168.1.90
(

)

: External signal

.

(

x

): Cannot operate now

.

2.3.2 Channel Selection


CH1, CH2, CH3, CH4, Quad(

), and the

Seq./Save button are used to select the video
channel and zoom in factor. The following table
shows the functions in a different mode.

1+2 :59G 12.4 HR

QUALITY :

NTSC

RATE :

20 F/S

HD

SIZE

REC

1

20G

10.0%

2

39G

0.0%

IP :

10 / 01 / 2004 15:10:30

Advertising