Approach Tech DVR-3024 - Manual (Page 40)

38
RECORD
ALARM / MOTION
CLOCK/ TIMER
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO SYSTEM PAGE
05/15/04 18:19:30
05/15/04 18:19:36
05/15/04 18:23:10
05/15/04 18:23:50
05/15/04 18:25:05
05/15/04 18:27:12
05/15/04 18:50:30
05/15/04 18:51:20
LOG
ON
OFF
ON
REC
STOP
V-LOSS
PLAY
STOP-P
This page is used for accessing the history of the
operation status, setting the password, resuming
factory default, and determining the menu display
background.
OPERATION LOG:
This log shows the history of your operations
status, in chronological order. What the
following entries represent is detailed below.
ON: Powers up the device.
OFF: Powers off the device.
REC: Starts recording.
STOP: Ceases recording.
STOP-P: Ceases playback.
PLAY: Shows recorded video.
V-IN: Video input is connected.
V-LOSS: Video loss occurs.
P-LOSS: Power interruption occurs.
A-IN: Detects an alarm input.
LOCK:
Disables the entire front panel
controls.
UNLOCK:
Releases the key lock.
UPDATE: Updates system software.
Note: The log keeps history of the operations
statues on a revolving basis because of a
limit of 4000. When the log is full, the
newly registered record of an operation
will replace the existing records from the
oldest one.
OSD LANGUAGE:
This option allows you to select the OSD
language display as English or Chinese.
MENU BACKGND:
There are 3 levels of background color
transparencies you can choose from: level 1 is
totally transparent, level 3 is opaque, and level
2 is between levels 1 and 3. The background
color is used in the setup menu and the search
functions.
BUZZER:
This option determines the embedded buzzer
will sound a tone to signal the following
situations. A tone lasts about two seconds
long.
ON: Enables buzzer.
OFF: Disables buzzer.
Situation
Alarm occurs
Video loss occurs
Disk is full
Load factory default
Buzzer set to ON
Enable/disable key lock function
Power on /off mobile rack HDD
Backup operation complete
Timer activate/deactivate
Recording switching between HDDs
PASSWORD:
This option allows you to set a password to
prevent any unauthorized re-formatting of the
hard disk drives or use by the Viewer
Software. The standard password is “9999”.
OLD PASSWORD: Enter the pre-set password
(or the standard password if this is
the initial setting) to access the
password setting system.
NEW PASSWORD: Enter a 4-digit-number
password of your choosing which
will replace the pre-set password
(or the standard password “9999”).
SYSTEM
MENU BACKGND
BUZZER
PASSWORD
SETUP PWD
DEFAULT
VERSION
MAIN PAGE
SD / CD SETUP : SAVE
OPERATION LOG : ENTER
: 2
: OFF
: SET
: OFF
: LOAD
: ENTER