Approach Tech DVR-3024 User Manual
Page 46
44
5
TCP/IP Configuration setting
Click Start → Control Panel →
Network.Connections
→
Local
Area Connection
Select Internet Protocol (TCP/IP),
and then click Properties.
Before processing the DVR installation
in a WAN, please make sure the
Internet connection works properly. If
not, please contact your ISP provider.
If you are using a DHCP server, please
select Obtain an IP address automatically.
Any assigned IP address for the connected
DVRs must be in the same class type as
the server. If there is no DHCP server,
please select specify an IP address and
type in the IP address of your PC. This IP
address must be different from the DVR IP
but in the same class type.
NOTE: The IP address of a DVR in a network
must be unique to itself as opposed
to those of the other chosen PCs, but
in the same class type.