Clear-Com RCS-2700 - Manual (Page 41)

R C S - 2 7 0 0 S O U R C E A S S I G N M E N T P A N E L 2 - 2 1
WIRING SUMMARY FOR 8-SOURCE SYSTEMS
The following table shows the basic groups of connections that form various
sized 8-source systems. Check that the wiring indicated for each topic has been
performed. Refer to wiring diagrams elsewhere in this chapter for the detailed
connections.
Table 2-4: Wiring Configurations for an 8-Source System
*Exceptions are unconnected source channels, which should be set to on.
**If you want to monitor power with RCS-WIN or with an RCU-67 Remote
Control Unit, you must jumper pin 3 to pin 2, and jumper pin 6 to pin 5.
BASIC WIRING FOR 24-DESTINATION,
8-SOURCE SYSTEM
ADDITIONAL WIRING
FOR 48 DESTINATIONS
ADDITIONAL WIRING FOR
72 DESTINATIONS
MAIN UNIT UNIT 2 UNIT 4
ADDRESS M 2 4
SOURCES 1–8 1–8 1–8
DESTINATIONS 1–24 25–48 49–72
TERMINATION
SWITCHES
On Off* Off*
SOURCE EXPANSIONS Tied together Tied together Tied together
DESTINATION POWER
(SINGLE CHANNEL)
+30 VDC +30 VDC +30 VDC
DESTINATION POWER
(2-CHANNEL TW)
No connection** No connection** No connection**
RCS POWER +30 VDC +30 VDC +30 VDC
DATA LINK To Unit 2 To Unit 4 Last connection