Clear-Com HX System Frames User Manual

Page 16

Advertising
background image

5

Configuration status lights
The four configuration status lights indicate which of the four onboard
configurations is currently active. The currently active configuration’s light
illuminates steadily.

6

Power supply alarm lights (1 and 2)
An Eclipse HX-PiCo matrix has two internal power supply units. One power
supply unit can power an entire matrix; the second unit provides a backup in case
of an equipment failure.

In addition, the two supplies have separate IEC connectors to AC mains power,
and are designed for completely automatic and transparent changeover between
supplies in the event of an outage on one of the AC mains circuits.

The front-panel alarm lights do not illuminate under normal operating conditions.

The following conditions cause a power-supply alarm light to illuminate:

• If any of the voltages produced by the first power supply unit fall

below normal levels.

• If any of the voltages produced by the second power supply unit fall

below normal levels.


Once the power-supply fault condition is no longer present, the power-supply
alarm light goes out.

7

LAN Status lights
When a local area network is connected to the matrix’s LAN port, the LAN UP
light steadily illuminates to indicate that the Eclipse HX-PiCo matrix is connected
to a local area network. The Rx light flashes when data is being received.

Note:

The front-panel System Status screen shows activity when a LAN is connected
and communicating with the matrix.

8

Display (menu) screen
Using the display screen and setup/enter rotary control, a variety of actions can
be performed directly on the Eclipse HX-PiCo matrix, without recourse to the EHX
configuration software (hosted on an external PC).

For more information about using the Eclipse HX-PiCo menu system,
see 5 Using the Eclipse HX-PiCo.

9

Setup / Enter rotary control
Using the display screen and setup/enter rotary control, a variety of actions can
be performed directly on the Eclipse HX-PiCo matrix, without recourse to the EHX
configuration software (hosted on an external PC).

For more information about using the Eclipse HX-PiCo menu system, see
5 Using the Eclipse HX-PiCo.

Table 3: Key to Figure 2: Front Panel controls and lights

16

Eclipse HX-PiCo User Guide

Advertising
This manual is related to the following products: