Clear-Com HX System Frames - Manual (Page 69)

module.
I-Series The I-Series is a family of Eclipse HX-supported user panels.
The series includes two display stations, two non-display stations,
two expansion panels, and a level-control panel.
Eclipse HX also supports V-Series panels (see below).
ISO The ISO function, short for panel ISOlation, allows a panel
operator to call a destination and interrupt all of that destination’s
other audio paths and establish a private conversation. When the
call is completed the destination’s audio pathways are restored to
their original state before the interruption.
Keygroup KeyGroups provide a way of assigning a label to multiple panels
simultaneously even within a networked matrix system. Once the
KeyGroups have been defined using EHX, all the keys within a
KeyGroup can be changed with a single assignment in Production
Maestro (Pro mode only).
Label A label is an alphanumeric name of up to five characters that
identifies a source, destination, or control function accessed by an
intercom panel. Labels appear in the displays of the intercom
panel.
Labels can identify panels, ports interfaced to other external
equipment, fixed groups, party lines, and special control functions.
MADI Multichannel Audio Digital Interface. The MADI or AES10
electronic communications protocol defines the data format and
electrical characteristics of an interface carrying multiple channels
of digital audio.
Multiplexing The process by which two or more signals are transmitted over a
single communications channel. Examples include time division
and wavelength division multiplexing.
Non-volatile Memory Data stored in the CPU’s firmware (ROM) that is not lost when the
power is turned off.
Palette The port, keyGroup and Monitor selection screen in Production
Maestro.
Panel Any intelligent intercom device connected to the rear-panel analog
ports of the central matrix. This term does not refer to devices
connected through interface modules.
69 Eclipse HX-PiCo User Guide