Configuring the server date/time settings, 3 configuring the server date/time settings – Clear-Com Concert for Newsroom User Manual
Page 18
18
Server Installation Guide
5. Select the eth0 device and press <ENTER>
6. Using the spacebar, uncheck the Use DHCP option and enter the Static IP address information
retrieved during Step #1
Figure 6: Statically configuring the server IP address
7. Using the arrow keys, select Ok and press <ENTER>
8. Using the arrow keys, select Save and press <ENTER>
9. Using the arrow keys, select Save&Quit and press <ENTER>
10. Reboot the server to apply your changes.
11. Once restarted, you should see the IP address displayed above the login prompt.
3.1.3 Configuring the server date/time settings
You may wish to configure the
server’s date/time for your specific geographical location.
To configure the server date/time settings:
1. Power on the Concert Server and login as root (default password=concert).
2. At the prompt, type date [mmddhhmmyyyy]. Press Enter.
mm = two digit month
dd = two digit day
hh = two digit hour
mm = two digit minute
yyyy = four digit year