Interface gateway, Supported audio hardware, Audio cable assemblies – Clear-Com Concert for Newsroom User Manual

Page 35: Mini50 (scsi) to xlr cable assembly (included), 6 interface gateway, 1 supported audio hardware, 2 audio cable assemblies, 1 mini50 (scsi) to xlr cable assembly (included)

Advertising
background image


PN 810554Z Rev A OCT 01 2012

6 Interface Gateway

The Concert Interface Gateway application facilitates hardware interfacing of up to 8 duplex channels
through a 4-Wire interface card (available on Concert Server 4W models only). This interface is then
used to bring four-wire audio into the Concert system.

6.1 Supported Audio Hardware

Currently, the only audio hardware supported by the Interface Gateway is the AudioScience
ASI5640
PCIe card and the discontinued M-Audio Delta-1010 PCI card. All 4-Wire Concert
Servers distributed by Clear-Com, come with the ASI5640 installed and pre-configured.

6.2 Audio cable assemblies

The Concert Server 4W model comes with a pre-installed 4W interface card. This card facilitates up to
8 balanced input and output analog connections. There are two cable assemblies available to the
customer:

An XLR terminated breakout cable providing 8 input and 8 output mono connections

AN RJ-45 terminated breakout cable providing 8 duplex connections

6.2.1 Mini50 (SCSI) to XLR cable assembly (included)

The mini50 (SCSI Type II) to XLR cable assembly consists of two dissimilar cables. The first cable
(CBL-1004) attaches to the SCSI port on the rear of the Concert Server and attaches to the second
cable (CBL-1044) which has 16 XLR terminations. The cable pair facilitates the following:

8 XLR inputs (male) and 8 XLR outputs (female).

A total of 16 analog mono connections.

Balanced audio.

Note:

Signal level setting depends on the type of analog equipment connected.

Advertising
This manual is related to the following products: