INSTEON Thermostat with Humidity (2441TH) Manual User Manual
Page 9
Page 9 of 28 Rev: 1/21/2014 8:35 AM
Third press of Program:
Start Time
•
Up/Down arrows cycle through time in 15-minute increments. Note: when pressing the Down arrow, if
you come within 15 minutes of another preprogrammed mode time, you will not be able to increase
the time any further.
•
Pressing and holding Up/Down arrows cycles faster.
Note: AM/PM changes automatically as needed.
Note: The start of one program mode is also the end of the previous program mode.
Fourth press of Program:
Cool setpoint
•
Up/Down arrows cycle through temperature.
Fifth press of Program:
Heat setpoint
•
Up/Down arrows cycle through temperature.
Sixth press of Program:
• Restarts the process to program another Mode/Day
NOTE: The four modes come preprogrammed. The defaults are for all days:
Day Modes
Start Time
Thermostat Mode
Heat Setting
Cool Setting
Wake
6:00AM
Auto
65°F (18°C)
75°F (24°C)
Leave
8:30AM
Auto
60°F (16°C)
80°F (27°C)
Return
5:00PM
Auto
65°F (18°C)
75°F (24°C)
Sleep
11:00PM
Auto
60°F (16°C)
80°F (27°C)