Command conventions – CognitiveTPG A798 User Manual
Page 33
Chapter 4: Programming Commands
33
Revision C 12/09
A798-PG00001C
Flash download
Code (hexadecimal)
Command
Page
1B 5B 7D
Switch to flash download mode
100
1D 00
Return boot sector firmware part number
100
1D 01
Return segment number status of flash memory
101
1D 02 nn
Select flash memory sector to download
101
1D 06
Get firmware CRC
101
1D 07
Return microprocessor CRC
101
1D 0E
Erase all flash contents except boot sector
101
1D 0F
Return main program flash CRC
102
1D 10 n
Erase selected flash sector
102
1D 11 aL aH cL cH d1…dn Download to active flash sector
102
1D FF
Reset firmware
102
Command conventions
The following information describes how each command is organized:
Name:
Name of command.
ASCII:
The ASCII control code.
Hexadecimal:
The hexadecimal control code.
Decimal:
The decimal control code.
Value:
A description of the command operands.
Range:
The upper and lower limits of the command operand.
Default:
The command operand default after printer reset.
Description:
Brief description and summary of the command.
Formulas:
Any formulas used for this command.
Exceptions:
Describes any exceptions to this command; for example, incompatible commands.
Related information: Describes related information for this command; for example, bit information.