CognitiveTPG A798 - Manual (Page 41)

Chapter 4: Programming Commands 41 Revision C 12/09
A798-PG00001C
Print and feed paper
ASCII ESC J n
Hexadecimal 1B 4A n
Decimal 27 74 n
Value of n: n/203 inch in A798 native mode, A794 emulation and Application Compatible Escape Commands emulation
mode; n/360 inch in A793 emulation mode
Range of n: 0–255
Prints one line from the buffer and feeds the paper n/8 mm (n/203 inch). The line height equals the character height when n
is too small.
If the set horizontal and vertical minimum motion units command (1D 50) is used to change the horizontal and vertical
minimum motion units, the parameters of this command (print and feed paper) will be interpreted accordingly.
Related information
For more information, see the description of the set horizontal and vertical minimum motion units command in this
document.
Print and feed n lines
ASCII ESC d n
Hexadecimal 1B 64 n
Decimal 27 100 n
Range of n: 1–255 (0 is interpreted as 1)
Prints one line from the buffer and feeds paper n lines at the current line height.