CognitiveTPG A798 - Manual (Page 55)

Chapter 4: Programming Commands 55 Revision C 12/09
A798-PG00001C
Select international character code
ASCII ESC R n
Hexadecimal 1B 52 n
Decimal 27 82 n
Value of n:
A798 native mode A793 emulation Application Compatible Escape Command emulation
(1B 52 n only)
0 = Code Page 437 0 = Code Page 437 0 = U.S.A.
1 = Code Page 850 Not 0 = Code Page 850 1 = France
2 = Code Page 852 2 = Germany
3 = Code Page 860 3 =-U.K.
4 = Code Page 863 4 = Denmark I
5 = Code Page 865 5 = Sweden
6 = Code Page 858 6 = Italy
7 = Code Page 866 7 = Spain
8 = Code Page 1252 8 = Japan
9 = Code Page 862 9 = Norway
10 = Code Page 737, Greek (only in A798 native mode)
12 = Code Page 857
Default: 0 (Code Page 437)
Selects the character set to be used. Look in “Appendix B: Resident Character Sets” in the A798 User Guide for the
character sets.
There are two codes for this command (see select international character set, 1B 74 n). Both codes perform the same
function.
Related information
The LEGACY emulation selection applies only to the command “Select international character code” (1B 52 n). The
LEGACY emulation generates the same as A798 native mode for the command “Select international character set table”
(1B 74 n).
Select or cancel 90 degree clockwise rotated print
ASCII ESC V n
Hexadecimal 1B 56 n
Decimal 27 86 n
Value of n: 0 = Cancel
1 = Set
Default: 0 (Cancel)
Rotates characters 90 degrees clockwise. The command remains in effect until the printer is reset or until a clear printer
(0x10) or rotated print (1B 12) command is received. See summary of rotated printing in this document.