Comprehensive CVG-724xl - Manual (Page 22)

18
Auto(NTSC System)
PIP
Source: VGA-2
Figure 12: PIP Size – Split Screen
7.2.5.2 Moving the Position of the PIP
To move the position of the PIP, as illustrated in Figure 13, use the OSD
menu (Utility>>PIP Setting>>H-Position; V-Position).
When the Source Prompt is ON, and the PIP Frame is ON, you can instantly
position the PIP using the preset position control keys on the infra-red remote
control transmitter.
When there is no orange frame, use the +, -, Up and DOWN buttons
1 .
Auto(NTSC System) Auto(NTSC System)
Figure 13: Moving the Position of the PIP
1 On the machine, or the navigation control keys on the infra-red remote control transmitter (see Figure 14)