Comprehensive CVG-724xl - Manual (Page 33)

29
8.4.2.2 Adjusting the Zoom Position
You can adjust the zoom position via one or more of the following methods:
Using the preset position control
keys (see Figure 26) on the infra-red
remote control transmitter (see
Figure 14), which instantly move
the position of the zoom to up to
nine preset fixed locations 1
Figure 26: Preset Position Control Keys
Using the navigation control keys on
the infra-red remote control
transmitter (see Figure 14), to fine
tune the zoom position (that is, to
slowly zoom-in at any location on
the screen) 2 , as Figure 27 illustrates
Figure 27: Navigation Control Keys
Using the OSD Menu buttons (see Figure 28) 3
Figure 28: Geometry (Zoom Position Adjustment) Screen
1 For example, to zoom-in to the lower right corner of the image, press the button
2 For example, to zoom-in toward the lower right of the image, press the and the buttons separately, as required
3 For example, to zoom-in to the lower right part of the image instead of the top left part, press the + and DOWN OSD Menu
buttons on the front panel separately, as required