Comprehensive CVG-724xl - Manual (Page 37)

33
Table 13: PIP Setting Utility Screen Features
Button Function Range Default
PIP On/Off Activate or deactivate the PIP feature
PIP Source Select the PIP source, as described in section 7.2.1
PIP Size Select between: 1/25, 1/16, 1/9, 1/4, Split or User Define
PIP Frame Allows the PIP to appear with or without an orange frame
H - Position Set the horizontal position of the PIP 0 to 36 1
V - Position Set the vertical position of the PIP 0 to 36 1
User Define Size After selecting the User Define PIP Size, set the PIP size (H-
size and V-Size)
0 to 255 63
8.5.5 Choosing the Seamless Switch Utility Settings
From the Seamless Switch Utility screen (see Figure 34), you can choose the image
transition speed Mode and activate the Auto Search, as described in Table 14:
Figure 34: Seamless Switch Utility Screen
Table 14: Seamless Switch Utility Screen Features
Button Function
Mode Select image between:
Fast an immediate switch, without checking the resolution. However, the image
transition may appear unstable
Safe – a smooth image transition - the input resolution at the input is checked and
outputted after a few seconds delay, but it takes longer than fast
Moderate – between fast and safe
Auto Search Activate the Auto Search to find the active source when the unit is powered up; or
deactivate the Auto Search (when the unit is powered up, displays the source
selected prior to power down)