CTI Products PCLTA PCI Interface - Manual (Page 19)

PCLTA Installation Manual PCLTA Initialization & Testing
CTI Products, Inc.
68-11199-135
15
d. The following “Setup Complete” window will be displayed. Click the
“Finish” button to continue.
e. The following window will provide a selection for restarting the computer.
Select “NO, I will restart my computer later”, then click the “Finish”
button.
During the PCLTA device driver installation, the following line is added
to the config.nt file to provide a driver for DOS applications:
device=%SystemRoot%\system32\pcltdos.sys /D1
f. Finally, power down the computer so that the PCLTA network interface
card can be installed.