CTI Products EXB-IP Ethernet System Extender - Manual (Page 31)

CTI Products, Inc. EXB-IP User Guide
IP Configuration – EXB Config 31
B ACKUP & R ESTORE O PERATIONS
The EXB Config software and the configuration files for the EXB-IP modules are not backed up as part of the
ASTRO® 25 or any other system's Back UP & Restore (BAR) solution. Follow the Backup & Recovery
procedures in this section for backing up and restoring these program files and configuration files.
The procedures in this section apply only to the EXB Config software and EXB-IP module configuration files,
and do not back up or restore part of the ASTRO® 25 or any other system.
EXB Config Software Backup
1. If needed, use a commercially available method to make a backup copy of the
EXB Config distribution media (up to the limit of copies allowed by the license).
2. Store the original distribution media and the backup media in safe places.
EXB Config Software Restore
1. Locate either the original or backup copies of the EXB Config sioftware distribution media.
2. Re-install the EXB Config software as described in this manual.
EXB-IP module Configuration Files Backup
Be sure to save the EXB-IP module configuration files whenever they are changed.
The Custom EXB-IP module System Configuration Files are the files have been generated to describe your
system. They include files with the following extension:
•
ChannelName.elp2
Where:
ChannelName is the name you used when you saved your system and
elp2 is the file extension.
Note 1:
If you have defined multiple channels, each one will have its own file.
1. Use Windows Explorer to find the current set of files that you are using for your system.
2. Use Windows Explorer or a commercially available method to make a backup copy of the files.
(It may be helpful to use a program to Zip them up into a single file.)
3. Store the backup copy in safe places.
EXB-IP module Configuration Files Restore
1. Locate the backup of the EXB-IP module Configuration files.
2. Use Windows Explorer to copy those files to an appropriate directory on the PC that runs EXB Config
software.