CTI Products EXB-IP Ethernet System Extender - Manual (Page 7)

CTI Products, Inc. EXB-IP User Guide
Introduction 7
A VAILABLE M ODELS
The EXB module is identified by the model number found on the rear panel of the module. The table below
shows the model numbers and the type of EXB it represents.
Model Number EXB Type (WAN Media) MCN Network Transceiver
S1-60962 EXB-IP Module(10Base-T Ethernet) 78 Kbps
S1-60963 EXB-IP Module (10Base-T Ethernet) 1.25 Mbps (1250K
The 78K version connects to standard MCN modules (CIB, AIB, GPIO, HIB-IP Modules, etc.).
Versions: EXB-IP (Legacy) & EXB-IP 8000 Modules
Different version numbers have different capabilities. The version number is printed after the model number on
the label on the rear of the module. For example, S1-60962-300 would be Version 300.
EXB-IP Legacy modules (Versions up to 399)
The EXB-IP Legacy versions modules have fixed destination UPD Port numbers.
EXB-IP 8000 Version modules (Versions 400 and up)
The EXB-IP 8000 version modules have configurable destination UDP Port numbers. This allows flexibility in
using them in wide area networks (WANs) which may filter on UDP Port numbers.
EXB-IP 8000 Port Selection
The EXB-IP 8000 modules support 3 types of UDP Ports:
EXB-IP Legacy
EXB-IP 8000
Custom
The EXB-IP Legacy UDP Port selection allows backward compatible with the EXB-IP Legacy modules.
The EXB-IP 8000 UDP Port selection is used for compatibility with Motorola Solutions, Inc. (MSI) Astro25™
Radio Network Infrastructure (RNI) Version 7.13 and above.
The Custom UDP Port selection allows entry of custom UDP Port numbers if required for other networks.
Release of the EXB-IP 8000 modules is timed to coincide with the MSI Astro25™ Version 7.13 release.
R
EFERENCE
D
OCUMENTS
The following additional information is available.
Part Number Document
S2-60425 Monitoring and Control Network Comparator Display System Manual
S2-60426 CIB Comparator Interface Manual
S2-61043 MCNRCD for Windows Manual