CTI Products TIB TSAM Interface - Manual (Page 15)

TIB Hardware Reference Connectors
CTI Products, Inc.
68-10911-100
10
Connector J1 provides the discrete I/O for the TSAM interface. Table 6 gives the
pinout for this connector. Table 5 describes the functions of the I/O signals.
Signal Direction Description
TX Select Out Input/Output Activated to select the transmitter to steer to. This
signal is used as an Output only.
Tx Select In Input Ground input to indicate the active transmitter(s).
Force Select Output Activated to force TSAM to steer to the selected
transmitter.
Table 5 - I/O Signal Descriptions