Controlled Products Systems Group AE-100 - Manual (Page 2)

2
Contents
Introduction
The Model AE-100 Commercial Telephone Entry System is designed
for use as an access control device for small apartments or gated
communities with up to 125 residents. The system can be used in a
lobby or outside. Surface, recessed, and pedestal mounting options
are supported. The system utilizes hands-free, full duplex telephone
communications between visitors and residents for granting access.
Housed in a locked, rugged stainless steel faced enclosure, the AE-100
features a lighted 12-key telephone style keypad and four operation
buttons all with bright, easy-to-see graphics. The backlit two-line directory
LCD display scrolls a programmable welcome message and shows the
directory Names and Directory Codes. The system contains a built-in
microphone, tamper resistant speaker, and a TTY connector for the
hearing impaired.
The heavy duty access relay can control electric door strikes, magnetic
locks, door & gate operators, or barrier gates.
Multi-lingual display programming prompts and voice help is available with
a choice of English, Spanish, French-Canadian, or Portuguese language
selection for the system. The system can be programmed locally using
the keypad, or remotely with a touch tone telephone.
Instruction manuals and other support documents in Spanish,
French-Canadian, and Portuguese are available on the
Linear Web site’s AE-100 product page at www.linearcorp.com.
Optional features that the AE-100 supports are provisions for postal lock
and color CCTV camera installation.
The AE-100 is powered from a 16 VAC plug-in transformer and supports
an internal rechargeable 1.2 amp/hour backup battery (not included). The
battery charging circuit will support an external backup battery with up to
7 amp/hour capacity.
Before starting the installation, please read and understand these
instructions. Become familiar with the illustrations and wiring
diagrams. They will be a guide to installing the system in an effi cient
and professional manner.
Hardware Features
2-LINE, 16-CHARACTER-PER-LINE LCD DISPLAY
LED backlit display with easy-to-read .3” high characters
HEAVY DUTY FORM “C” (N.O. & N.C.) ACCESS RELAY
Relay has 10-amp AC & 7-amp DC @ 30 Volts rating
POSTAL SWITCH OPTION
Cabinet supports mounting a standard U.S.P.S. postal switch for
mail carrier access
BUILT-IN ANNUNCIATOR
Programmable for beeps during access and chirps during keystrokes
SMART BACKUP BATTERY CHARGING CIRCUIT
Automatic load shed disconnects the backup battery if battery
voltage drops too low
TTY JACK
Front panel connection for TTY text communications device for
the hearing impaired
OPTIONAL COLOR CCTV CAMERA
System supports a Model CCM-1 color CCD camera for viewing
the visitor area
FLEXIBLE TELEPHONE LINE CONNECTION
Telephone line can connect to on-board RJ-11 jack or terminal
block
REMOVABLE TERMINAL BLOCKS
All terminal blocks are removable for quick servicing
TRIM RING FOR RECESS MOUNTING
System can be mounted recessed using the optional Model
TR-100 trim ring
Software Highlights
AUTOMATIC DUAL PROGRAMMING METHODS
The system automatically recognizes two methods
of programming to aid installers already familiar with
programming other manufacturer’s access control systems
LOCALLY PROGRAMMABLE
All programming can be performed from the unit’s keypad
REMOTE TELEPHONE PROGRAMMING
Most programming can be performed with a TouchTone™
telephone over the phone line
125 RESIDENT DIRECTORY CAPACITY
Up to 125 residents can have a directory listing
125 STAND-ALONE ENTRY CODES
Up to 125 Stand-alone Entry Codes without a Directory Entry
can be used for gaining access (Each Stand-alone Entry Code
used reduces the number of available resident Directory Entries
by one).
4 DIGIT ENTRY CODE LENGTH
4-digit length for all Entry Codes
MANUAL ACCESS RELAY OPERATION
Access relay can be activated indefi nitely or for a set period of time
2-3 DIGIT DIRECTORY NUMBER LENGTH
Directory Number lengths can be customized for small or large
installations
MULTIPLE UNIT SUPPORT
Up to four AE-100 units can be connected to the same
telephone line and share programming data using system utility
commands.
RESIDENT CALL-BACK SUPPORT
Residents can call the system to initiate 2-way communications
with a visitor. (Single unit installations only.)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Introduction ............................................... 2
Hardware Features ................................... 2
Software Highlights ................................... 2
Feature Overview ..................................... 3
Operation .................................................. 3
Database Overview .................................. 3
Component Locations ............................... 4
Wiring Diagram ......................................... 5
Important Mounting Requirements ........... 6
Entry System Mounting ............................ 7
Entry System Mounting (Continued) ......... 8
Access Relay Wiring ................................. 9
Telephone Wiring ...................................... 9
Multiple Unit Telephone Wiring ............... 10
Power, Battery, & Ground Wiring ............ 11
Optional Postal Lock ............................... 12
Optional Color CCTV Camera ................ 12
Programming Reference & Factory
Defaults .................................................. 13
Access to Programming ......................... 14
Programming from the Keypad (Standard
Method) .................................................. 14 Programming Over the Telephone .......... 15
Multi-unit Installations ............................. 16
Changing the Master Password ............. 16
Resident Data Programming .................. 17
Stand-alone Entry Code Programming ... 18
System Options ...................................... 18
System Options (Continued) .................. 19
System Options (Continued) .................. 20
System Utility Commands ...................... 21
System Utility Commands (Continued) ... 22
Alternate Programming Section .............. 23
Alternate Programming Reference ......... 24
System Adjustments ............................... 32
System Diagnostics ................................ 32
AE-100 Operation ................................... 33
Specifi cations ......................................... 34
Dimension Drawing ................................ 34
Accessories ............................................ 34
Troubleshooting ...................................... 35
Linear Limited Warranty.......................... 35
FCC Notice ............................................. 35