Impulse MAQ20-940 User Manual - Manual (Page 11)

ReDAQ
®
Shape Software for MAQ
®
20 User Manual
11
development, but will only run for 30 minutes. Order the License Unlock Code, part number MAQ20-940,
from Dataforth Corporation to enable unlimited use.
The License Unlock Code is tied to the serial number of the COM module of MAQ
®
20 Data Acquisition
System being used. To install the License Unlock Code and hardware serial number in the software,
open the Enter License Unlock Code window from the Help menu, then type or copy/paste the
information into the fields provided. Up to 10 unlock codes can be entered to interface to up to 10
MAQ
®
20 Data Acquisition Systems. The MAQ
®
20 COM module serial number must have the format of a
7-digit main number followed by a 2-digit suffix. If the main number has fewer than 7-digits or the suffix
has a single digit, use leading zeros to obtain the correct format. i.e. serial number 12345-6 must be
entered as 0012345-06.
1.6 Related Documents
The following documents are available for download from the Dataforth Corporation website,
www.dataforth.com:
• MA1036 MAQ20 Quick Start Guide
• MA1037 MAQ20 Configuration Software Tool User Manual
• MA1038 ReDAQ
®
Shape for MAQ
®
20 User Manual (this manual)
• MA1039 MAQ20 LabVIEW VI Examples User Manual (coming soon)
• MA10xx MAQ20 Hardware User Manual (I/O Module specific)