Impulse MAQ20-940 User Manual User Manual
Page 2
ReDAQ
®
Shape Software for MAQ
®
20 User Manual
2
MAQ
®
20 Industrial Data Acquisition and Control System
ReDAQ
®
Shape for MAQ
®
20 User Manual
MA1038 Rev. B
– May 2012
© 2012 Dataforth Corporation. All Rights Reserved.
ISO9001:2008-Registered QMS
The information in this manual has been checked carefully and is believed to be accurate; however,
Dataforth assumes no responsibility for possible inaccuracies or omissions. Specifications are subject to
change without notice.
The information, tables, diagrams, and photographs contained herein are the property of Dataforth
Corporation. No part of this manual may be reproduced or distributed by any means, electronic,
mechanical, or otherwise, for any purpose other than the purchaser’s personal use, without the express
written consent of Dataforth Corporation.