Impulse MAQ20-940 User Manual - Manual (Page 47)

ReDAQ
®
Shape Software for MAQ
®
20 User Manual
47
5.3.10 Thermometer Tool
The Thermometer Tool displays data from analog input channels in the MAQ
®
20 data acquisition system.
To change the Thermometer Tool properties, double click on the device to open the Properties window.
Only the Appearance, Behavior, Layout and Scale categories contain parameters that are useful to
modify when interfacing to the MAQ
®
20.
Assign the analog input channel to display in the Thermometer Tool by using the Thermometer
Input pull down selection box.