Impulse MAQ20-940 User Manual - Manual (Page 42)

ReDAQ
®
Shape Software for MAQ
®
20 User Manual
42
5.3.5 Knob Tool
The Knob Tool outputs data to analog output channels in the MAQ
®
20 data acquisition system.
To change the Knob Tool properties, double click on the device to open the Properties window. Only the
Appearance, Behavior, Layout and Scale categories contain parameters that are useful to modify when
interfacing to the MAQ
®
20.
Assign the analog output channel to send data to with the Knob Tool by using the Knob Output
pull down selection box.