Impulse MAQ20-940 User Manual - Manual (Page 20)

ReDAQ
®
Shape Software for MAQ
®
20 User Manual
20
Input Range can be set independently for each channel. Use the Input Range selection box to
set the desired value. The data scale also automatically reset when the input range changed.
Control Loop or Alarm Output function for a given analog input channel is configured by selecting
the desired function from the selection box. Alarms can be Tracking or Latched with High, Low,
High-Low, High-High, Low-Low, or High-High Low-Low limits. Alarm limit values are set using the
Control Loop / Alarm Output tab.
Alarms can be reset with the Reset Latched Mode Alarm button or by assigning reset function to
a Button Tool in the user project.
Scale Data tab: