MAX SN883RH2 - Manual (Page 12)

12
SWITCHING SINGLE ACTUATION TO
CONTACT ACTUATION WITH ANTI-
DOUBLE FIRE MECHANISM
• ALWAYS disconnect air supply before
switching the triggering method.
1 Gently push out the Spring Pin which indicat-
ed with " T " mark straight with the punch or
similar tool.
2 Remove the Switching Lever to the direction
of the arrow.
NOTE:
When switching back CONTACT ACTUATION
with ANTI-DOUBLE FIRE MECHANISM to SIN-
GLE ACTUATION, equip the Switching Lever
facing "D" mark front with the Spring Pin to the
Trigger by reverse procedure.
Trigger
Punch
Spring Pin
WARNING
Spring Pin
Switching Lever
SN883RH2_SN890CH2(34).book 12 ページ ２０１１年７月８日 金曜日 午後６時１分