MAX SN883RH2 - Manual (Page 7)

7
2. SPECIFICATIONS AND TECHNICAL DATA
1. NAME OF PARTS
2. TOOL SPECIFICATIONS
3. FASTENER SPECIFICATIONS
1 Frame
2 Cylinder Cap
3 Contact Arm
4 Nose
5 Magazine
6 Trigger
7 Grip
8 Exhaust Cover
9 Pusher
0 Adjustment Dial
PRODUCT NO. SN883RH2 SN890CH2<34>
HEIGHT 11-7/8" (300 mm) 12-1/2" (316 mm)
WIDTH 4-3/4" (121 mm) 4-3/4" (121 mm)
LENGTH 20-3/4" (526 mm) 17-1/8" (435 mm)
WEIGHT 7.2 lbs. (3.3 kg) 7.3 lbs. (3.3 kg)
RECOMMENDED
OPERATING PRESSURE
70 to 100 p.s.i. (5 to 7 bar)
LOADING CAPACITY 64 nails 90 nails
AIR CONSUMPTION 0.077 ft 3 at 90 p.s.i. (2.1 at 6 bar) operating pressure
PRODUCT NO. SN883RH2 SN890CH2<34>
NAIL LENGTH 2" to 3-1/4" (50 to 83 mm) 2" to 3-1/2" (50 to 90 mm)
SHANK DIAMETER .113" to .148" (2.9 to 3.8 mm) .110" to .131" (2.8 to 3.3 mm)
SHANK TYPE Smooth, Ring, Screw
HEAD DIAMETER .267" to .295" (6.8 to 7.5 mm) .256" to .303" (6.5 to 7.7 mm)
COLLATION ANGLE 21 degree 34 degree
HEAD Full round head Clipped head
8 7
2
1
4
3
6
9
5
0
SN883RH2_SN890CH2(34).book 7 ページ ２０１１年７月８日 金曜日 午後６時１分