MAX SN883RH2 - Manual (Page 15)

15
SEQUENTIAL TRIP
The Sequential Trip requires the operator to hold the tool against the work before pulling the trigger. This
makes accurate fastener placement easier, for instance on framing, toe nailing and crating applications.
The Sequential Trip allows exact fastener location without the possibility of driving a second fastener on
recoil, as described under "Contact Trip".
The Sequential Trip Tool has a positive safety advantage because it will not accidentally drive a fastener
if the tool is contacted against the work-or anything else-while the operator is holding the trigger pulled.
SEQUENTIAL TRIP
Identified by ORANGE TRIGGER.
PROCEDURE
1 Pulling the Trigger and keeping it
pulled.
2 Depressing the Contact Arm.
1 Depressing the Contact Arm.
2 Pulling the Trigger and keeping
it pulled.
SINGLE ACTUATION • The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released.
• The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released.
CONTACT ACTUATION
WITH ANTI-DOUBLE
FIRE MECHANISM The tool fires a nail each time when
the Contact Arm is depressed. • The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released.
SEQUENTIAL TRIP The tool cannot fire a nail. • The tool fires a nail.
• The tool cannot fire a second nail
until the Trigger is released and
the Contact Arm is left work sur-
face.
SN883RH2_SN890CH2(34).book 15 ページ ２０１１年７月８日 金曜日 午後６時１分