MAX SN883RH2 - Manual (Page 13)

13
• Use sintering steel grey metallic color Switching Lever
Confirm and use the designated original Switching Lever when carrying out the switching back
procedure.
The use of Switching Lever other than the designated original one will cause serious accidents.
(e.g., firing fasteners just pulling trigger, etc.)
• Never install the Switching Lever to the Previous model
It will cause serious accidents. (e.g., firing fasteners just pulling trigger, etc)
Color Shape (1/1 scale) Tool
SINTERING STEEL
GREY METALLIC
NF550, SN883, and
SN883 with thin trigger
STAINLESS SILVER
SN883 and SN890 with
thick trigger
STEEL BLACKENING HS90A
WARNING
Projection Shape Flat Shape
This model Another model
SN883RH2_SN890CH2(34).book 13 ページ ２０１１年７月８日 金曜日 午後６時１分