MaxPower Corp XBDM - Manual (Page 11)

XBDM USER’S MANUAL BYPASS DISTRIBUTION MODULE
Xtreme Power Conversion Corporation (Rev 8/29/13) Page 11
2. Install the XBDM in a suitable horizontal location in the rack rail using four (4) user-provided
mounting screws.
Vertical Installation (0U)
1. Attach the two (2) XBDM horizontal mounting brackets (included) on each end of the XBDM
using four (4) retaining screws (included) see Figure 2.
Figure 14 – XBDM Vertical Mounting
2. Attach the two vertical mounting brackets (included) to the horizontal rack mounting brackets
on each end of the XBDM using four (4) retaining screws (included) see Figure 2.
3. Install the XBDM in a suitable vertical location on the side of the rack rail with four (4) user
provided mounting screws.