Figure 10-2. auxiliary processor board (apb) – Micromod Micro-DCI: 53MC5000 PLC AND PRINTER INTERFACES User Manual
Page 118
SD-53-2675
Printer/PLC
Option
16DI/DO
or
6DI/4DO
Micro-
Link B
Expansion Board Slots
DDI-A
DDI-B
DIDO
MLBC
5
4
3
2
1
No
No
No
Yes
MLAC
MLBC
No
No
Yes
No
DIDO
MLAC
No
No
Yes
Yes
DIDO
MLAC
MLBC
Yes
No
No
No
APB
MLAC
Yes
No
No
Yes
APB
MLAC
MLBC
No
Yes
No
No
MLAC
APB
No
Yes
Yes
No
DIDO
MLAC
APB
Yes
Yes
No
No
APB
MLAC
APB
Notes: DDI-A/B = Digital Device Interface-A/B, APB = Auxiliary Processor Board, DIDO = 16 Digi-
tal Input/Digital Output or 6 Digital Input/4 Digital Output Board, MLBC = MicroLink B Communica-
tions Board, MLAC = MicroLink A Communications Board (It is required if there is an MLBC Board.
It is assumed in the example that the PCS always has a minimum MicroLink A Communications op-
tion).
Figure 10-2. Auxiliary Processor Board (APB)
READING LINE 5 OF THE TABLE BELOW:
IF THE CONTROLLER WERE CONFIGURED WITH THE
PRINTER/PLC DDI-A OPTION AND MicroLink B
COMMUNICATIONS OPTION, THEN THE EXPANSION
BOARD WOULD HAVE AN APB OPTION CARD IN
SLOT 3, AN MLAC OPTION CARD IN SLOT 2, AND AN
MLBC OPTION CARD IN SLOT 1.
APB JUMPER CONFIGURATION FOR DDI-A
AND DDI-B PLC/PRINTER OPTIONS
•
•
•
•
•
•
•
•
J2 T
-
J1 R
-
J4 T+
J3 R+-
53MC9015 53MC5000 PLC and Printer Interfaces
10-4
PARTS