Micromod Micro-DCI: 53MC5000 PLC AND PRINTER INTERFACES - Manual (Page 62)

Read Analog Command (B678, B654) - Enter the ASCII code for the type of analog
reads to be performed.
Enter the code as determined from step 5 for the following two datapoints:
Analog Input Type for Board Addresses 32, 33, 36, 37 (B679, B655).
Analog Input Type for Board Addresses 34, 35, 38, 39 (B680, B656).
Samples to Average (Read Input Average Data command) (B681, B657) - 0 disables
sampling. It affects all analog inputs. Enter the appropriate number.
APB Setup Bytes for OPTOMUX (Table 5-1)
Mode (B290, B456) - Enter a 2 to start the OPTOMUX interface protocol.
RS-232/485 ITB
XMT (CR13) and RCV (CR14) LEDs alternately blink whenever there is PCS-station
board activity.
OPTO 22 Brain Boards
The XMT and RCV LEDs flash on all of the selected OPTO brain boards.
53MC9015 53MC5000 PLC and Printer Interfaces
5-16
OPTO