Micromod Micro-DCI: 53SU6000 COMMUNICATIONS SERVICES - Manual (Page 27)

53SU6000 INSTALLATION AND SETUP GUIDE
Introduction 19
3.5 Installing the 53SU6000 Software
Now the process of installing the 53SU6000 software may begin.
3.5.1 Pre-Setup Procedure
• Check that the 53SU6000 hardware key is connected to the parallel port of the computer.
• Have the 53SU6000 license key(s) ready.
• Have the Micro-DCI Supervisor board I/O port address(es) ready.
• Power-up the PC and boot Windows 2000 Professional or Windows XP Professional.
• Log on to Windows with administrative privileges. You must have administrative privileges or
the installations process will not complete successfully.
• Close all Windows applications that are open, (such as Microsoft Word, Excel, Mail,
Scheduler, etc.).
3.5.2 Beginning Micro-DCI Master Setup
• Insert the Micro-DCI CD into the CD-ROM drive.
• Open Explorer and select the drive letter of the CD-ROM drive.
• In the root directory of the CD-ROM, double click on the setup.exe file.
• In the Micro-DCI Master Setup, click on the Micro-DCI Communications Services
Installation button.
3.5.3 Beginning 53SU6000 Installation
• The InstallShield Wizard is loaded and then The 53SU6000 System Setup window appears.
Make sure all other applications are closed on your PC.
• Click Next to begin installing the 53SU6000.
3.5.4 Choosing the Location for the 53SU6000 System
• The Choose Destination Location window appears, which enables you to specify the drive
and directory where you want the 53SU6000 installed. You can accept the default path of
C:\UDCI
by clicking the Next button or you can change the destination directory by clicking
the Browse button.
• If you clicked the Browse button, enter both the drive and directory you want to use as the
destination directory in the Choose Directory field.
• If the directory does not exist, Setup will ask you if it should be created. If this window appears,
click the Yes button.
• Click the Next button.
• The Select Program Folder window appears. Select the program Folder you want the
program icons added to. The Micro-DCI Communications Services folder is selected by
default as the folder for the program icons. You can accept the default, select an existing
✎ NOTE 53SU6000 Setup is the main installation program. Several sub-
windows will open and close throughout the installation process.
The installation will be complete when the main 53SU6000 Setup
program ends. Do not reboot the base PC until the main 53SU6000
Setup prompts you to do so.