Micromod Micro-DCI: 53SU6000 COMMUNICATIONS SERVICES - Manual (Page 28)

53SU6000 INSTALLATION AND SETUP GUIDE
20 Introduction
program folder, or type a new program folder.
• Click the Next button.
• A Setup window with a progress bar appears and the Micro-DCI files begin to install.
• The Enter Information window appears and prompts you to enter an eight-character name for
your entire Micro-DCI local system.
• Either accept the default name or enter a name and click the Next button.
• The progress bar finishes updating and the Setup process continues.
3.5.5 Installing Data Access Objects (DAO)
• Micro-DCI Communication Services uses Data Access Objects (DAO’s) to store local
databases. If Microsoft DAO 3.5 has not been previously installed, the setup program instructs
you to run the DAO Setup from the Micro-DCI Master Setup menu. This may be done anytime
after the completion of the Micro-Tools installation.
• If DAO 3.5 is already present on the system, Section 3.5.5 will be bypassed and the setup
program will perform the actions in Section 3.5.6 .
3.5.6 Installing Micro-DCI Services / Program Folder
• The Micro-DCI Services will be automatically installed. A window will pop up to install these
services.
• When the services are installed, the window will close and return you to the Main 53SU6000
Setup.
• The 53SU6000 Setup program then creates the Micro-DCI Communications Services
program folder and automatically adds the appropriate icons for the 53SU6000 product.
3.5.7 Installing 53SU6000 License Keys
Setup will launch the Micro-DCI License Administration program to enter your license keys. License keys
must be added one at a time.
• Select Add new license... from the License menu.
In the License Administration dialog, type in your license information for one license key.
Be certain to enter all information exactly as it appears. Click Save and this information will
be verified and written to the license file. If the information entered is not correct, a pop-up
message box will appear and the information will have to be corrected.
The following license keys are used:
• Repeat the two steps above for each license key.
• When finished, select Exit from the File menu.
udcidde - enables the DDE server
udcigds - enables the Micro-PWC server
udciopclocal - enables the OPC server
udciunlim - enables the unlimited tag option
udci - enables the 300-tag option