Minuteman E Ride 26 - Manual (Page 8)

8
Safety Information
1.3 Operational Precautions
The E Ride 26is a battery-operated
hard surface floor cleaning system
that utilizes a water / cleaning solu-
tion that is applied to the floor and
then vacuumed back into the ma-
chine by way of an integrated squee-
gee for later disposal.
Liquid residue remaining on the
floor during operation can rep-
resent a slip and fall hazard to
the operator and others in the
vicinity of machine use. When
working with the machine, op-
erators should use firm and
skid-proof shoes. Areas where
floor cleaning will occur should
be appropriately marked with
suitable slip and fall hazard
signs / markers / pop-up
cones, etc!
• It is indispensable for the operator or
user of the machine to become thor-
oughly acquainted with attached im-
plements and controls - as well as
their various functions - before oper-
ation commences.
• Before commencing operation of the
machine, check for obvious signs of
loose parts, potential conditions in-
dicative of malfunctions, etc. Any
signs of potential problems must be
remedied before actual operation
commences.
The electrical system in the
machine is not designed to
suppress sparks. Accordingly,
use of the E Ride 26 where fire
or explosion hazards may exist
due to flammable gases or va-
pors, flammable liquids, com-
bustible dust, or ignitable fibers
or flyings, must be avoided.
The machine can cause an ex-
plosion when operated near
such areas.
Use caution when operating
the machine on a ramp or in-
cline. Do not turn the machine
on an incline, as it may be-
come unstable and flip over.
Do not leave the machine unat-
tended on a ramp or incline, as
it could roll freely and result in
personal injury. The E Ride 26
is not designed for use on sur-
faces with a greater than 6%
incline or slope. Adopt opera-
tion habits to local conditions to
ensure machine is always un-
der operator's control.
The E Ride 26 is not designed
for decontamination purposes
and should not be used in ar-
eas where hazardous wastes
or materials are stored or have
been spilled. Use of the E Ride
26 in these areas could result
in the spread of hazardous
wastes or materials and opera-
tor exposure to same.
• Remove the key to avoid unautho-
rized use of the machine.