If level is high – MotorVac TRANSTECH HD User Manual
Page 15
If level is high:
c)
Press and hold the DRAIN button for 5-10 seconds.
d)
Re-check fluid level, repeat step “ c) ” if necessary.
Stop engine and let cool off if necessary.
12.
Disconnect hoses from the INDUSTRIAL TRANSTECH and connect the vehicle’s cooler lines to their original
connection ports.
13.
Start the engine, check cooler lines for leaks, and re-tighten as necessary.
14.
Step on the foot brake firmly, then slowly shift the gear lever to Low Gear (first gear) then back to Park. Check the
transmission’s fluid level, adjust if necessary.
Service tip:
To minimize fluid mixture, a “Pan Drain” procedure may be performed, (without removing the
transmission pan).
A)
Follow steps 1-6 from this section.
Perform Filter change procedure steps: a), b), c), g), h).
C)
Continue with steps 8 & 9.