Multichannel Systems MEA2100-System Manual - Manual (Page 12)

MEA2100-System Manual
8
3.3
First Use of MC_Rack
Data Source Setup
Every MEA of the MEA2100-System can be operated completely independently
by one instance of MC_Rack. To be able to open more than one instance of MC_Rack,
please first open the "Advanced Configuration" dialog in the "Edit" menu.
Please increase the maximum number of instances according to the number of MEAs
you are going to use in parallel:
 one MC_Rack instance for one HS32, HS60 or one HS120,
 two MC_Rack instances for one HS2x32, HS2x60, or two HS32, HS60 or two HS120,
 four MC_Rack instances for two HS2x32 or HS2x60.
Afterwards you can open several instances of MC_Rack and assign every instance
to one MEA of the system.
After opening MC_Rack as many times as necessary, please open the “Data Source Setup”
dialog from the “Edit” menu. This dialog can only be opened in one instance at a time,
please do the adjustments in one instance after the other. The example below shows
the settings for one MEA2100-HS2x60.