Multichannel Systems MEA2100-System Manual - Manual (Page 56)

MEA2100-System Manual
52
7.3
Technical Specifications
MEA2100-System
Warning: The device may only be used together with MEA chips from Multi Channel Systems
MCS GmbH, and only for the specified purpose. Damage of the device and even fatal injuries
can result from improper use. Do not open the headstage or the interface box and do not
change hardware configuration as it could lead to improper behavior of the system.
General characteristics
Operating temperature 10 °C to 50 °C
Storage temperature 0 °C to 50 °C
Relative humidity 10 % to 85 %, non-condensing
Headstage
Dimensions (W x D x H) 256 mm x 151 mm x 25 mm
Weight 1000 g
Type of headstage MEA2100-HS32 for 32-electrode MEAs,
MEA2100-HS2x32 for 2 x 32-electrode MEAs
MEA2100-HS60 for 60-electrode MEAs,
MEA2100-HS2x60 for 2 x 60-electrode MEAs,
MEA2100-HS120 for 120-electrode MEAs
Integrated Amplifier
Number of analog recording channels 32 to 120, depending on the headstage type
Data resolution 16 bit
Input voltage range from +/- 812 μV to +/- 227 mV in 9 steps of x2
Bandwidth 0.1 Hz to 10 kHz
Sampling frequency per channel up to 50 kHz, software controlled
Input impedance 1 G
 || 10 pF
Integrated Heating Element
Temperature sensor type Pt 100 with four wire connection,
compatible with TCX
Accuracy +/- 0.1 °C