Multichannel Systems MEA2100-System Manual - Manual (Page 13)

Software
9
Select “USB” and MEA2100 (S/N: XXXXX-A) as Data Source. Select “Configuration” in the “Source
Layout”. Please select the type of the connected headstage in the "Amp" drop down menu.
If a MEA2100-HS2x60 is connected you have additionally to select the "Block" in the right drop
down menu of “Virtual Device Configuration”. For the first instance of MC_Rack, select Block 1
(Channel 1…64) and for the second instance Block 2 (Channel 65…128). Select the appropriate
MEA type from the drop down menu for each instance. If a second headstage is connected to
the same interface board, it will become available in the "Data Source Setup" as MEA2100
(S/N: XXXXX-B). The settings for the second headstage are analogous to the first.
MEA2100-32-System
The MEA2100-32-System is a descendant of the MEA2100-System with all available functions
except of the real-time feedback feature. In “Data Source Setup” it is present as an different
device “MEA2100-32”. The “MEA2100-2x32” can be operated separately with two instances
of MC_Rack as usual, two headstages with two MEAs with four instances of MC_Rack.