Multichannel Systems MEA2100-System Manual - Manual (Page 57)

Appendix
53
Integrated Stimulus Generators
Output current +/- 1.5 mA
Current output compliance voltage +/- 10 V
Output voltage +/- 12 V
Voltage output compliance current +/- 20 mA
Stimulation pattern rectangle: biphasic, monophasic, pulse trains
Number of stimulation channels 3 independent stimulation patterns
per 60 channels
Resolution 16 bit
Interface Board
Dimensions (W x D x H) 250 mm x 83 mm x 25 mm
Weight 300 g
Front panel
4 Digital inputs Lemo connector, EPL.00.250 NTN
4 Digital outputs Lemo connector, EPL.00.250 NTN
2 Auxiliary channels (not in use) Lemo connector, EPL.00.250 NTN
Rear panel
1 16 bit Digital In / Out 68-pin MCS standard connectors
1 20-pin connector: Analog IN Channel
3 to 8, additionally pins used for DSP 20-pin connector (2,54 mm grid),
dual row standard IDC
2 Analog Inputs, Channel 1 and
Channel 2 Lemo connector, EPL.00.250 NTN
2 USB high speed ports USB 2.0 high speed cable
(type A - mini B, 5 Pin)
Power Supply MPU 30, scope of delivery,
PWR DC 0.65 x 2.75 mm
Ground Common jack 4 mm, banana plug
1 Audio Output Stereo jack 3.5 mm, FFA.00.250 CTAC29