Multichannel Systems STG1000 Manual - Manual (Page 25)

Programming Stimulus Protocols
19
With this option, you enter a base value for modification of all values in the selected column. The
first row is modified by the base value. The second row is modified by the double value, the third
row by thrice the base value, and so on. With this feature, you can easily set up time or voltage
increments.
1. Under Type of Increment, select Count.
2. Enter the desired start value.
The value in the first row is incremented by the selected start value of 10. The next value is
modified by the double value (20), and so on.
You can now fill further columns in the same way. Thus, you can easily set up a stimulus with
incremented pulse lengths like this with only a few mouse-clicks.