Multichannel Systems STG1000 Manual User Manual
Page 53
Advertising
Synchronizing Events
47
4. On
the
Batch menu, click Start to start the download of the first file in the batch list (and the STG
if the option Start STG after Batch Download on the Settings menu is selected).
The progress of the pulse protocol is displayed in the Status column of the Batch Status
Display.
5. Click
Stop on the Batch menu to stop the batch if necessary.
6. Close
the
Batch Status Display with the Close command.
Warning: The STG starts immediately after the download if the option
Start STG after Batch
Download
on the
Settings
menu has been selected. Make sure to deselect this option if you do
not want to start the stimulation right away.
Advertising