Multichannel Systems STG3008-FA Manual - Manual (Page 79)

Analog Output Signals
73
Example 2: Influence of the length of a current pulse 100 μs versus 20 μs with an amplitude of
16 μA which is a hundredth of the limit of the maximum capacity of the STG3000 series (constant
amplitude and load resistance).
Example 2a: Current pulse with programmed 16 μA for 100 μs and 20 μs interval and 10 k
 load
resistance.
The pulse is biphasic,16 μA Green trace = current output (+I), pink trace = TTL trigger output from
the Sync Out.