Multichannel Systems TC01-TC02 Manual - Manual (Page 16)

Temperature Controller TC01/02 Manual
12
Diagnosis 2: Controller settings
This diagnose screen view is used for reviewing and checking the user settings.
Setpoint Temp Setpoint temperature
P Gain Proportional gain
I Gain Integrator gain
Max Power Maximum output power
Diagnosis 3: Controller output
This diagnose screen view is used for checking the operation of the internal controller.
Power Set Output power set by the controller.
Power Out Actual output power (product of Current Out and Supply Voltage)
Duty Cycle PWM Duty cycle (internal value)
Current Out Current through the primary coil of the isolating transformer
Supply Voltage Supply voltage (from power supply)
Diagnosis 4: Heating element
This diagnose screen view is used for checking the connected heating element.
On/off Current channel state
HE Voltage Output voltage applied to heating element
HE Current Output current applied to heating element
HE Resistance Heating element resistance (voltage-current ratio)
HE Power Output power delivered to heating element (voltage-current
product), should be 80 - 90 % of Power Out, depending on
heating element resistance)