Multichannel Systems TC01-TC02 Manual - Manual (Page 18)

Temperature Controller TC01/02 Manual
14
Two windows show the temperature on the two channels. The scaling of the y-axis is adjusted
automatically. The x-axis shows the absolute time taken from the system clock. The scale of the
time axis can be altered in the "Scale" drop down menu. Find in each channel window a "Power"
button to activate and deactivate the respective channel. The status "Off / On" is displayed.
If a channel is deactivated, the status "Off" is displayed above the "Power" button. Additionally
the status "Off" is displayed in red letters in the "Setpoint" window in exchange for the setpoint
temperature. The actual temperature is displayed as a number and plotted against time.
Click the "Info" button to display the "About" dialog, which shows basic information about
the TCX software.
In the select "Device" drop down menu, it is possible to select the type of instrument connected
to the respective channel.
Temperature values can be logged to a temperature file. Select a time interval and a file name
and press the "Start Logging" button. Time and temperature values will be logged at the
selected frequency. The extension of the file is ".txt".