American Dynamics ADCC1100 - Manual (Page 13)

7
Keyboard Installation and Operation
POWER, UL LISTED
CLASS 2 ONLY
MATRIX KEYBOARD
POWER
SUPPLY
1
2
3
AD MATRIX
MP-CBL
MP-CBL
ADCC1100 KEYBOARD
Figure 2.2: System Connections for Cable Distances of Seven Feet or Less
Installation
This installation should only be carried out by qualified personnel, and should conform
to all local electrical codes. Safeguards should be taken to avoid unintentional opera-
tion or damage by employees and maintenance personnel working about the premises,
by falling objects, by customers, by building vibration, and by similar causes.
Connections for Cable Distance of Seven Feet or Less
For installations where the keyboard-to-system cable distance is seven feet or less,
connect the cables in accordance with figure 2.2 below. Note the connections shown
are typical for all American Dynamics systems utilising an RS232 port.
The RJ-45 socket on the MP-KMI that is marked Matrix is connected to the switching
system using one of the MP-CBL cables supplied. The RJ-45 connector on the MP-KMI
marked Keyboard is connected to the ADCC1100 keyboard using the remaining MP-
CBL cable supplied.
CAUTION!
DO NOT CONNECT THE POWER SUPPLY UNTIL ALL
CONNECTIONS HAVE BEEN VERIFIED
CAUTION!
WHEN CONNECTING TO A MEGAPOWER LT MATRIX SWITCHER,
JUMPER LINKS 3 AND 4 SHOULD BE MOVED TO THE 2 AND 3
LINKED POSITION.