American Dynamics ADCC1100 - Manual (Page 28)

22
ADCC1100
Running Patterns
A pattern is a series of pan, tilt, zoom, and focus commands defined for a dome
camera. A pattern is programmed in real time, which means that the dome remembers
each pattern segment in the actual time it takes the operator to execute a command.
To run a pattern:
1. Press the OPERATOR tab key.
2. Call the camera that the pattern will run on.
3. Enter the pattern number (1 - 3) using the alphanumeric keys. The pattern
number will appear next to ENTER on the keyboard's display.
4. Press the PATTERN soft key.
Selecting and Running a Macro
A macro is a series of keyboard inputs that is executed using a single keystroke.
Macros are arranged on the keyboard display by means of icons and macro pages.
Each macro page consists of eight icons arranged in two rows of four with each icon
adjacent to a soft key (figure 3.5). The NEXT and PREVIOUS tab keys are used to
select macro pages.
The macros that have been programmed for the switching system will be recorded by
the system administrator.
Note: figure 3.5 shows a representation of a default macro page. During macro
programming, it is possible to assign a different icon to each macro, and a different
name to each macro page.
Previous Next Operator
Enter
Monitor Camera Macro
One
Page Eight
Macro
Two
Macro
Three
Macro
Four
Macro
Five
Macro
Six
Macro
Seven
Macro
Eight
Previous Next Operator
Previous Next Operator
Previous Next Operator
Previous Next Operator
Previous Next Operator
Previous Next Operator
Previous Next Operator
Enter
Monitor Camera Macro
One
Page One
Macro
Two
Macro
Three
Macro
Four
Macro
Five
Macro
Six
Macro
Seven
Macro
Eight
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Figure 3.5: Macro Pages