AudioBahn MULTIFUNCTIONAL SOURCE UNIT A3351 - Manual (Page 13)

The source will be changed according to the following order: .
>TUNER > DISC > (CHANGER) > AUX
Note :
Volume
Note: “MUTE” is displayed if the volume is set to 0.
Selecting Adjustment modes
Bass
Turn the bass level up / down
Default : 0 Setting Range : -7 to +7 (1.7dB per step)
If the Rotary encoder is not turned within 5 seconds after
selecting a mode,
B A S S , T R E B L E , B A L A N C E , F A D E R ,
S U B W O O F E R L E V E L , S U B W O O F E R F R E Q , E Q
C U R V E , V O L U M E , the unit automatically sets to the
previous mode. When the subwoofer is set to OFF, the level of
the subwoofer cannot be adjusted.
2) Turn the Rotary Encoder until the desired sound is obtained in each mode.
Bass > Treble > Balance >Fader > Sub woofer Level > Sub Woofer Freq >
EQ Curve >Volume
1) Press the [SEL] repeatedly to choose the desired adjustment mode.
Each press changes the mode as follows;
Turn the Rotary Encoder to adjust the volume level.
Default : 35 Setting Range : 0 to 80 (1dB per step)
CHANGER mode is only available if a CD/DVD Changer is connected.
For Satellite Broadcasting, set to AUX mode.
Tuner mode (See page 26)
CD mode (See page 14)
AUX mode
Note:
Basic Operations
11