AudioBahn MULTIFUNCTIONAL SOURCE UNIT A3351 - Manual (Page 36)

TA Volume Level
N O T E The initial setting at the factory is “40”
RDS Type
N O T E The initial setting at the factory is “RDS - Europe”
Changing Security Code
Turn the Rotary Encoder to adjust TA Volume Level (“TA Volume”) in the setting
range from 0 to 80.
Turn the Rotary Encoder to select either RDS - Europe, or RBDS - USA,
depending on your geographic location.
Turn the Rotary Encoder to select the “change Sec. Code”
Press [ENTER] and input the current Security Code by using Rotary Encoder & [>>l],[l<<]
keys, then press [ENTER].
Input the New Security Code and press [ENTER].
Input the New Security Code once again and press [ENTER].
N O T E The initial set security code at the factory is on your
Product ID Card.This factory set security code will
always work even if you forget what you changed it to. If
you do not enter a code for the new security code, the
security code will be disabled and resetting the unit or
disconnecting / reconnecting the battery will not require a
security code to operate the unit.
Setup Operation
34