AudioBahn MULTIFUNCTIONAL SOURCE UNIT A3351 - Manual (Page 28)

Changing Display
Press the [DISP] button to change the display.
Station Frequency > Station Name
Manual Tuning
Press the [|<<] or [>>|] button repeatedly until the desired station frequency is displayed.
[Rotary Encoder] [l<<] , [>>l]
[BAND/MENU]
[AST]
[DISP]
[ S O U R C E ]
“No Memory” is displayed if no Station Name is set.The Station
frequency is displayed for a moment when changing to a preset with a
Station name.
Press the [SOURCE] button to select the [TUNER] mode.
Press the [BAND/MENU] button repeatedly until the desired radio band is
displayed>
FM1 > FM2 > FM3 > AM1(MW) > AM2(LW)
Tuner
26
Automatic Seek Tuning
Preset Tuning
Press and hold the [|<<] or [>>|] button for more than a second to find a station
downward or upward respectively. Press the same button again to seek the next
stations.
1) Press the [BAND] button repeatedly until the desired radio band is displayed.
2) Press the preset number [1 through 6] buttons to tune to the preset station.